ALOM CMT Shell Configuration Commands
ALOM CMT Command
Summary
Comparable ILOM Command
password
Changes the login password of the current user.
set /SP/users/username password
restartssh
Restarts the SSH server so that new host keys generated by the ssh-keygen command are reloaded.
set /SP/services/ssh restart_sshd_action=true
setdate [[mmdd]HHMM |mmddHHMM[cc]yy][.SS]
Sets ALOM CMT date and time.
set /SP/clock datetime=value
setdefaults setdefaults
Resets all ALOM CMT configuration parameters to their default values. The –a option resets the user information to the factory default (one admin account only).
set /SP reset_to_defaults=configuration

set /SP reset_to_defaults=all
setkeyswitch [normal|stby|diag| locked]
Sets the status of the virtual keyswitch. Setting the virtual keyswitch to standby (stby) powers off the server. Before powering off the host server, ALOM CMT asks for a confirmation.
set /SYS keyswitch_state=value
setsc [param] [value]
Sets the specified ALOM CMT parameter to the assigned value.
set target property=value
setupsc
Runs the interactive configuration script. This script configures the ALOM CMT configuration variables.
No equivalent in ILOM
showplatform [–v]
Displays information about the host system’s hardware configuration, and whether the hardware is providing service. The –v option displays verbose information about the displayed components.
show /HOST
showfru
Displays information about the field-replaceable units (FRUs) in a host server.
No equivalent in ILOM
showusers

showusers –g lines
Displays a list of users currently logged in to ALOM CMT. The display for this command has a similar format to that of the UNIX command who. The –g option pauses the display after the number of lines you specify for lines.
show /SP/sessions

No equivalent in ILOM
showhost

showhost version
Displays version information for host-side components. The version option displays the same information as the showhost command with no option.
show /HOST
showkeyswitch
Displays status of virtual keyswitch.
show /SYS keyswitch_state
showsc [param]
Displays the current non-volatile random access memory (NVRAM) configuration parameters.
show target property
showdate
Displays the ALOM CMT date. ALOM CMT time is expressed in Coordinated Universal Time (UTC) rather than local time. The Solaris OS and ALOM CMT time are not synchronized.
show /SP/clock datetime
ssh-keygen –l

ssh-keygen –r

ssh-keygen –t {rsa|dsa}
Generates Secure Shell (SSH) host keys and displays the host key fingerprint on the SC.
show /SP/services/ssh/keys rsa|dsa

set /SP/services/ssh generate_new_key_action=true

set /SP/services/ssh generate_new_key_type=[rsa|dsa]
usershow [username]
Displays a list of all user accounts, permission levels, and whether passwords are assigned.
show /SP/users
useradd username
Adds a user account to ALOM CMT.
create /SP/users/username
userdel username

userdel –y username
Deletes a user account from ALOM CMT. The –y option enables you to skip the confirmation question.
delete /SP/users/username

delete –script /SP/users/username
userpassword [username]
Sets or changes a user password.
set /SP/users/username password
userperm [username] [c] [u] [a] [r]
Sets the permission level for a user account.
set /SP/users/username role=permissions

(where permissions are Administrator or Operator)
ALOM CMT Shell Log Commands
ALOM CMT Command
Summary
Comparable ILOM Command
showlogs [–b lines|–e lines|–v] [–g lines] [-p logtype[r|p]]
Displays the history of all events logged in the ALOM CMT RAM event log, or major and critical events in the persistent log. The –p option selects whether to display entries only from the RAM event log (logtype r) or the persistent event log (logtype p).
show /SP/logs/event/list

No equivalent in ILOM
consolehistory [–b lines|–e lines|–v] [–g lines] [boot|run]
Displays the host server console output buffers.
show /SP/console/history
ALOM CMT Shell Status and Control Commands
ALOM CMT Command
Summary
Comparable ILOM Command
showenvironment
Displays the environmental status of the host server. This information includes system temperatures, power supply status, front panel LED status, hard disk drive status, fan status, voltage, and current sensor status.
show –o table –level all /SYS
showpower [–v]
Displays power metrics for the host server.
show /SP/powermgmt
shownetwork [–v]
Displays the current network configuration information. The –v option shows additional information about your network, including information about your DHCP server.
show /SP/network
console

console –f
Connects to the host system console. The –f option forces the console write lock from one user to another.
start /SP/console

No equivalent in ILOM
break –c

break –D
Drops the host server from running the Solaris OS software into OpenBoot PROM or kmdb depending upon the mode in which the Solaris software was booted.
set /HOST send_break_action=break

set /HOST send_break_action=dumpcore
bootmode [normal] [reset_nvram] [config=configname][bootscript =string]
Controls the host server OpenBoot PROM firmware method of booting.
set /HOST/bootmode property=value

[where property is state, config, or script]
flashupdate –s IPaddr –f pathname [–v]
Downloads and updates system firmware (both host firmware and ALOM CMT firmware). For ILOM, ipaddr must be a TFTP server. If DHCP is used, ipaddr can be replaced by the name of the TFTP host.
load –source tftp://ipaddr/pathname
reset [–c]

reset [–y][–c]

reset –f

reset –d

reset [–d][–f]

reset [–d][–n]

reset [–d][–f][–n]
Attempts to gracefully reset the system. If that fails, this option forcefully reset the system.

Forcfully resets the system.

Attempts to gracefully reset the control domain. If that fails, this option forcefully reset the control domain.

Forcefully resets the control domain.

When resetting the control domain, this option may automatically boot (this is the default behavior when the auto-boot option is not specified).

When resetting the control domain, this option does not automatically boot and stays at the OpenBoot ok prompt. This option overrides all reboot variables and stops the control domain at the OpenBoot ok prompt after host reset. The auto-boot? option remains unchanged, thus subsequest reset commands automatically reboot host if the auto-boot? option is set to true.
reset /SYS

reset -script /SYS

reset -f /SYS

reset /HOST/domain/control

reset - f /HOST/domain/control

set /HOST/domain/control auto-boot=disable reset /HOST/domain/control

set /HOST/domain/control auto-boot=disable reset -f /HOST/domain/control
powercycle [–y] [–f]

powercycle –y

powercycle -f
poweroff followed by poweron. The –f option forces an immediate poweroff, otherwise the command attempts a graceful shutdown.
stop /SYS

start /SYS

stop –script /SYS

start –script /SYS

stop –force /SYS

start –force /SYS
poweroff

poweroff –y

poweroff –f
Removes the main power from the host server. The –y option enables you to skip the confirmation question. ALOM CMT attempts to shut the server down gracefully. The –f option forces an immediate shutdown.
stop /SYS

stop –script /SYS

stop –force /SYS
poweron
Applies the main power to the host server or FRU.
start /SYS
setlocator [on/off]
Turns the Locator LED on the server on or off.
set /SYS/LOCATE value=value
showfaults [–v]
Displays current valid system faults.
show /SP/faultmgmt
clearfault UUID
Manually repairs system faults.
set /SYS/component clear_fault_action=true
showlocator
Displays the current state of the Locator LED as either on or off.
show /SYS/LOCATE
ALOM CMT Shell FRU Commands
ALOM CMT Command
Summary
Comparable ILOM Command
setfru –c data
The –c option enables you to store information (such as inventory codes) on all FRUs in a system.
set /SYS customer_frudata=data
showfru –g lines [–s|–d] [FRU]
Displays information about the FRUs in a host server.
No equivalent in ILOM
removefru [–y] [FRU]
Prepares a FRU (for example, a power supply) for removal. The –y option enables you to skip the confirmation question.
set /SYS/PS0 prepare_to_remove_action=true
ALOM CMT Shell Automatic System Recovery (ASR) Commands
ALOM CMT Command
Summary
Comparable ILOM Command
enablecomponent asr-key
Removes a component from the asr-db blacklist.
set /SYS/component component_state=enabled
disablecomponent asr-key
Adds a component to the asr-db blacklist.
set /SYS/component component_state=disabled
showcomponent asr-key
Displays system components and their test status (ASR state).
show /SYS/component component_state
clearasrdb
Removes all entries from the asr-db blacklist.
No equivalent in ILOM
ALOM CMT Shell Miscellaneous Commands
ALOM CMT Command
Summary
Comparable ILOM Command
help [command]
Displays a list of all ALOM CMT commands with their syntax and a brief description of how each command works. Specifying a command name as an option enables you to view the help for that command.
help
resetsc

resetsc –y

Reboots ALOM CMT. The –y option enables you to skip the confirmation question.
reset /SP

reset –script /SP
userclimode
Sets the type of shell to shelltype, where shelltype is default or alom.
set /SP/users/username cli_mode=shelltype
logout
Logs out from an ALOM CMT shell session.
exit
setsc sys_ioreconfigure value
Sets the ioreconfiguration parameter to value, where value is true,false, or next-boot
set /HOST ioreconfigure=value